Enphase SC200G111C240US01 IQ System Controller 3G
Enphase Enpower 240 Volt Smart Switch
The Enphase IQ System Controller 3G is a device that connects your home to grid power, IQ Batteries, Generator, and solar PV with Microinverters. It is recommended to use IQ System Controller 3G for all new installs using IQ8 Series Microinverters. The device provides microgrid interconnection device (MID) functionality by automatically detecting and seamlessly transitioning the home energy system from grid power to backup power in the event of a grid failure. It consolidates interconnection equipment into a single enclosure and streamlines grid-independent capabilities of PV, storage, and generator installations by providing a consistent, pre-wired solution for residential applications.
DIY customers and solar installers must complete the Enphase Installer & Design Storage Certification Courses through Enphase University to commission their system. This will provide you with the Enphase Installer Authorization needed to activate the system. These courses can be accessed at the online Enphase University.
You are approved to install Enphase Storage, if you have completed the tasks below:
- Individual Storage Installer Certification
- Individual Storage Design Certification
- Optional: In-person training at one of Enphase’s regional centers
More information can be found at the following links:
- Installer Authorization Program Guidelines for Enphase.
- Installer Authorization Program Guidelines for Enphase Storage.
Electrical Specifications
- Nominal voltage / range (L-L) 240 VAC
- Nominal frequency / range 60 Hz / 56 - 63 Hz
- Maximum continuous current rating: 160A
- Maximum output overcurrent protection device: 200A
- Maximum input overcurrent protection device: 200A
- Maximum overcurrent protection device rating for generator circuit: 80A
- Maximum overcurrent protection device rating for storage circuit: 80A
- Breaker rating (pre-installed): 40A between L1 and Neutral; 40A between L2 and Neutral
- Continuous rated power: 3600VA
- Maximum continuous unbalance current: 30A @ 120V
- Peak unbalanced current: 80A @ 120V for two seconds
Mechanical Data
- Environmental rating: Outdoor, NEMA type 3R, polycarbonate construction
- Dimensions (WxHxD): 19.7 in x 36 in x 9.7 in (50cm x 91.6cm x 24.6cm)
- Weight: 87 lbs.
- Cooling: Natural convection, heat shield
- Altitude To 8200 feet
Warranty: 10 years
SKU | SC200G111C240US01 |
---|---|
Display "Price" | -- Default Configuration -- |