Schneider Electric 865-1030-1 Conext XW MPPT 60 Amp Solar Charge Controller

Conext 60 Amp MPPT Solar Charge Controller

The Conext XW Solar Charge Controller (XW SCC) is a photovoltaic (PV) charge controller that tracks the electrical maximum power point of a PV array to deliver the maximum available current for charging batteries. When charging, the XW SCC regulates battery voltage and output current based on the amount of energy available from the PV array and state-of-charge of the battery.

The XW SCC can be used with 12, 24, 36, 48, and 60-volt DC battery systems and is able to charge a lower voltage battery system from a higher voltage solar array. For example, the XW SCC can charge a 12-volt battery from 20 to 140 volt arrays. This provides flexibility for installers to use longer wiring runs without compromising efficiency. The XW Solar Charge Controller can be installed (in single or multi-unit configurations) with Conext XW Hybrid Inverter/Charger(s) or can be used in other solar energy systems where a solar charge controller is needed.

The XW SCC incorporates a dynamic Maximum Power Point Tracking (MPPT) algorithm designed to maximize energy harvest from the PV array. The MPPT constantly adjusts the operating points of the array to ensure it stays on the maximum power point. It does not stop energy harvest to sweep the array like some other competing products. This feature is beneficial all sunlight conditions, especially in areas with fast moving cloud cover and quickly changing solar conditions.

Standard features of the Solar Charge Controller include:

• Maximum Power Point Tracking (MPPT) delivers maximum available power from PV array to battery bank
• Integrated PV ground-fault protection
• Ultra-reliable, convection-cooled design does not require a cooling fan large, aluminum, die-cast heat-sink allows full output current up to 45°C without thermal derating
• Selectable two or three-stage charging algorithms with manual equalization to maximize system performance and improve battery life Configurable auxiliary output
• Two-line, 16-character liquid crystal display (LCD) and four buttons for configuration and system monitoring
• Input over-voltage and under-voltage protection, output over-current protection, and backfeed (reverse current) protection (warning and fault messages appear on LCD when unit shuts down as a protective measure)
• Over-temperature protection and power derating when output power and ambient temperature are high
• Battery Temperature Sensor (BTS) included automatically provides temperature compensated battery charging
• Xanbus™-enabled network communications protocol (developed by Xantrex)
• Communicates settings and activity to other Xanbus™-enabled devices, such as the XW Hybrid Inverter/Charger, the XW System Control Panel (XW SCP), XW Automatic Generator Start (XW AGS), and other XW Solar Charge Controllers.

3 year warranty